5 Things to Consider When Installing a Sump Pump in Austin, Texas

Summertime in Austin Texas is always a scorcher and that means homeowners must be prepared with a reliable and durable sump pump to protect them from flooding. Sump pumps work by collecting and discharging ground water from around your home, so you don't have to worry about your basement succumbing to water damage. As with any home renovation, installing a sump pump requires careful consideration of a range of factors.

If you are looking to get the most out of your sump pump installation, here are the top five things to consider when installing a sump pump:

1. Ensure Proper Water Flow

To keep water flowing away from your home, your sump pump must be properly sized depending on the amount of water it's collecting. An undersized sump pump won't be able to adequately collect and remove water from around your home. On the other hand, an oversized sump pump will be costly and will be energy inefficient.

To determine the proper size of your sump pump, your best bet is to seek the services of a professional plumber who can measure the size of your sump pit and advise you on the appropriate size and type of sump pump for your needs.

2.Location, Location and Location

The location of the sump pump is critical for proper and efficient water removal and preventing flooding. Place your sump pump as close to the middle area of the sump pit as possible to ensure the pump is collecting the maximum amount of water.

3. Make Sure Sump Pump Switches are Configured Right

The sump pump switch will determine the amount of water that needs to enter the sump pit before the pump is triggered to turn on. You will need to make sure you choose the right pump switch setting. Setting the switch too high may cause flooding, while setting the switch too low will prevent the pump from turning on when there is water accumulation in the sump pit.

4. Choose the Right Type of Sump Pump

Your choice of sump pump will be determined by a number of factors. The size and design of your sump pit, the type of soil around your home, the water capacity required, and your budget. Depending on your budget, you can choose from the three main types of sump pumps: pedestal, submersible, and hydraulic.

Pedestal sump pumps are the most economical choice but are the loudest. Submersible sump pumps, the most popular choice, are very reliable and are quieter than the pedestal type. Hydraulic sump pumps are the most expensive and are very efficient.

5. Choose the Most Reliable Motor

The sump pump motor is the most important component of the system. Choose a motor with a high horsepower rating, preferably no less than ¼ HP because the higher the horsepower, the more efficient the motor. The motor should also have enough power to lift the water vertically to the discharge pipe. You will also need to make sure the motor is correctly sealed to prevent it from any water damage.

Installing a sump pump is a great way to protect your home from flooding. However, it is important to make sure you consider the right factors to ensure the sump pump is properly installed and will work correctly. Professional plumbers have the expertise to ensure that the sump pump is properly installed and will work efficiently for many years to come.

sump pump installation

sump pumps

Austin Texas