Most Commonly Asked Questions About Garbage Disposal Installation in Austin, Texas 78723

Living in a modern world today offers many conveniences and comforts, one of which is the addition of a garbage disposal. Garbage disposals have come a long way since they were invented in 1927 and are becoming an increasingly popular feature in many homes. If you've recently decided to invest in a garbage disposal in Austin, Texas 78723, you may have some questions about the installation steps involved. Today, we're going to answer some of the most commonly asked questions about garbage disposal installation in the 78723 area.

What Kind of Plumber Do I Need?

When it comes to the installation and servicing of a garbage disposal, the best course of action is to hire a plumber with experience in the area. For most garbage disposal installation inquiries in Austin, Texas 78723, we recommend Abacus Residential and Commercial Plumbers. The experienced Abacus team members offer a high level of expertise and customer experience and are trained to the highest standards.

What Should I Expect From a Professional Garbage Disposal Installation?

When it comes to having a garbage disposal professionally installed, there are a few steps involved. First, the existing Plumbing system has to be disconnected from the garbage disposal. Then the lines need to be cleaned out, the new garbage disposal installed, and the old waste line recapped. When the job is complete, the plumber should check the installation and make sure the system is operating properly.

Do I Need to Make Any Changes to My Plumbing System for a Garbage Disposal?

Yes, you may need to make changes to your plumbing system to accommodate a garbage disposal. The first is to test and make sure there is enough water pressure in the Drain line. For most modern garbage disposals, a minimum of around 30 psi is recommended. If your current plumbing system doesn't meet this standard, you'll likely need to have a booster pump installed.

You may also need to replace the existing pipe. Older homes tend to have galvanized steel pipes, which can rust and block the flow of water if there's too much waste built up inside. This can be easily replaced with a plastic pipe.

Finally, you may also need to replace the drain line, which is the pipe that runs from the sink to the garbage disposal. Check to make sure it's in good condition and if it's not, you'll want to replace it.

What Materials Do I Need?

When it comes to materials, you'll need to buy a replacement plumbing line, a waste line, and a garbage disposal. If your existing drain line isn't up to par, you'll also need to buy a new one. You'll also need to buy the necessary fittings and connectors for connecting the pipes to the garbage disposal.

For the garbage disposal, we suggest going with an insinkerator brand disposal for an easy install. It comes with everything you need for the install, including all the necessary fittings and a high-level of quality.

How Long Does It Take to Install a Garbage Disposal?

It takes most professional plumbers around two to three hours to install a garbage disposal. This is due to the fact that there are a few steps involved, it's important to make sure the system is set up correctly, and the plumber needs to make sure everything is working properly once it's installed.

Are There Any Safety Precautions I Need to Take?

When it comes to garbage disposals, safety should always be of the utmost importance. Make sure you read all the instructions and safety information before attempting to install the disposal yourself. If you're having it professionally installed, make sure the plumber is licensed and insured to work on your disposal.

It's also important to remember to be careful with any electrical devices near the disposal. Make sure you turn off the power to the disposal prior to working on it to avoid any chances of an electrical shock or injury.

Garbage Disposal Installation

Plumbing

Professional Plumbers