Annual Air Conditioning Cooling Maintenance Inspection

An Abacus state certified HVAC technician will perform the following multi-point inspection and report back any findings for your review. 

• Check Inside Cooling Coil, if accessible: Build-up on the coil reduces the system’s ability to cool, making your air conditioning run longer, increasing energy consumption and raising your cooling costs.
• Check Primary and Secondary Drains: A clogged condensate drain increases humidity levels and can cause ceiling damage.
• Check Outdoor Condenser Coil for Cleanliness: Foreign material on the condenser reduces the system’s cooling capacity. A dirty coil will increase your cooling cost by 50% or more, and can shorten the life of your air conditioner.
• Check Operation Pressures for Proper Refrigerant Charge: Improper refrigerant charges – too much or too little – can damage the compressor and will cause high electric bills, and reduced cooling capacity due to efficient equipment operation.
• Adjust Blower Components: Proper adjustment of blower and components is necessary for adequate airflow to assure maximum cooling performance.
• Monitor AC Cycle: Our trained Technician will assure that the air conditioner is cycling properly.
• Monitor Voltage & Amp. Draw on all Motors: Motors are designed to operate at standard voltage and amperage draw. By measuring amperage draw, problems can be identified before the unit fails.
• Check and Tighten all Loose Electrical Connections: Loose electrical connections are a common source of problems which cause your electric parts to fail and your air conditioner to become inoperative.
• Check Thermostat for Proper Operation: To ensure even temperature control for your environment.
• Check Air Filtration: Check the air filter for any debris or excessive amounts of dust accumulation.