5 Things to Consider with Time and Salt in 78757, Austin, Texas

Living in 78757, Austin, Texas requires more attention when it comes to preserving the salt balance in the air and water. Salt in the water can have an impact on the conditions of the pipes, and in the air, it can corrode metal hardware. In Texas, being aware of how salt can impact the home's structure is essential in keeping the property's maintenance in check. To keep salt and time from threatening the home's integrity, this article will show five essential considerations. They will help ensure the fair amount of salt is used, the pipes are properly handled, and the structure of the home is optimally protected.

1. Monitor Amount of Salt Used For Water Softening

Many Texas homes use water softening or salt brine to reduce the amount of calcium and magnesium in the water. While it's important to use enough salt, it's critical not to use too much sodium. An excess of salt can corrode both the water heater and plumbing system, leading to costly repairs.

To monitor the amount of salt used, homeowners should test the hardness of the water. Testing the water will determine if salt must be used in the first place, and if it's necessary, the amount of salt needed. After the water has been softened, it should again be tested to ensure it's not too harsh.

2. Clean Pipes Regularly

Salty water can reduce the efficiency of pipes, and as a result, slow down water flow. The calcium and magnesium buildup can also cause problems for pipes and appliances. To reduce the risks of corrosion, the pipes should be cleaned regularly.

One of the most effective ways to clean the pipes is to use a Hydro Jetter. It uses the power of water pressure to remove scale, calcium deposits, corrosion, and other buildup that can obstruct water flow. The force of the water also has the power to clear clogs. While customers should refer to the service manual for their home's water heater, or contact a licensed plumber, it's highly recommended to flush the water heater annually.

3. Balance Evaporation and Salt Intake

A home's pipes are prone to corrosion if the homeowner allows either too much or too little salt intake. To keep the salt in balance, the key is to control how much of it evaporates or is introduced into the air.

Homeowners should pay attention to the climate. If it's windy, the amount of salt in the air will naturally increase due to the ocean's salt evaporating into the air. To reduce this risk, it's advisable to build a shelter or porch around the house.

At the same time, if the climate is dry, more salt needs to be added to the water system. This is typically done through the installation of a humidifier, dehumidifier, or window air conditioner. These devices maintain the proper balance of salt levels in the air, helping to reduce the risk of corrosion.

4. Clean the Walls on a Regular Basis

Homeowners that live close to the ocean should pay close attention to the walls and foundation of their homes. Salt water can seep into the walls, leading to symptoms of corrosion.

To prevent this from happening, walls should be wiped off on a regular basis. This helps to reduce the corrosive effects of the salt. Homeowners should also pay attention to the roof and basement to prevent corrosion from occurring.

5. Use Resistant Materials

Homeowners should also take the time to ensure that they are using resistant materials when it comes to protecting their homes against corrosion. There are a variety of products made from galvanized steel and aluminum that are designed to resist salt. This includes railings, roofing, and outdoor furniture.

In addition, using high-quality paint and sealants can make the walls and doorframes more resistant to corrosion. This is especially true for doors, windows, and skylights.

Salt

Time

Corrosion