Top 5 Things to Consider Before Toilet Installation in Austin, Texas (78739)

When it comes to toilet installation, the process of assembling it can be overwhelming for some people, especially for those who do not have prior experience with plumbing. Proper toilet installation usually requires several steps including the layout of the toilet's placement, accurate measurements, and alignment of the toilet flange. To ensure that you install your toilet properly, here are the top five things you should consider before starting a project:

1. Measure Your Toilet Space

When preparing for your toilet installation, one of the most important steps is measuring your toilet space. You must measure the size of your current toilet if there is one installed, as well as measure the drainage pipe that's below. If you're dealing with a low-profile flush tank, then you must keep your measurements to the lowest profile size (roughly 27-9/16 inches). You will also have to measure the distance of what separates your toilet from the wall, so be sure to take accurate measurements.

2. Level the Toilet Before Securely Fastening it to the Floor

The next step involves making sure that your toilet is sitting level. If the toilet is not securely fastened to the floor, it can cause problems with proper draining and lead to significant water damage. Before installing your toilet, check to make sure that its footing is sitting level with the floor. You can use a toilet wax ring, a rubberized seal made from wax, to create a seal between the bottom edge of the toilet and the floor in order to help prevent leaks.

3. Keep the Seal Intact

Having a tight seal after installation is necessary to ensure the toilet drains properly. To avoid water leakage, the toilet flange, which is the metal pipe that's connected to the drainpipe, should be firmly secured and remain above the flooring. If the flange is below the flooring, it's likely that you won't be able to properly install the toilet, or you could end up removing a portion of your floor in order to fix the problem.

4. Adjust the Toilet Placement After the Installation

Once you have finished the installation of your toilet, you will need to adjust and fix the toilet's alignment after it has been securely fastened. This is important for making sure that the installation flows correctly and is properly leveled. You should also check for any water leakage before turning the water back on to the toilet.

5. Seek Professional Assistance

Finally, if at any point during the installation you feel like you may not have the tools or special knowledge to complete the job, it's always a good idea to call a licensed professional plumber who has experience in toilet installation. A professional plumber will be able to properly identify any potential issues you may encounter during your toilet installation and provide advice on how to rectify them.

If you're living in the Austin, Texas (78739) area and you're in need of toilet installation, Abacus Residential & Commercial Plumbers is here to help. Our courteous and knowledgeable plumbers have the necessary skills and experience to ensure that your toilet is installed quickly and correctly. We provide various plumbing services and pride ourselves in our 100% customer satisfaction guarantee.

Toilet Installation

Plumber Service

Austin Texas