Five Things to Consider when Detecting Leaks in Austin, TX

When it comes to detecting a leak in your Austin, TX home or business, there are a few key things to consider. Keeping the cost and time to resolve the problem low requires being knowledgeable about several aspects of the problem before seeking professional help. The potential for waste or property damage can be limited by being proactive and understanding the five components of determining what is causing the issue.

Leaking water or gas can be leaking into your walls, ceilings, and floors, or it can be leaking under the slab foundation of your property. A professional plumber should be called immediately as this leak may remain undetected until it seen, felt or heard. Although plumbing problems can lead to significant damage and disruption to your living and working space, they can be handled in a cost-effective and efficient manner. Before hiring a plumber, consider the following five pieces of information:

1. Locate the Source of the Leak

The first order of business is to determine the source of the leak. Depending on the type of property you have, the location of the leak can be more challenging. If it is a slab foundation, it could be located deep in the concrete. If you have a problem inside your walls, ceilings, or floors, a plumbing camera should be used to locate it. In either case, the plumbing contractor should be able to provide you with an estimate as to the cost for a repair.

2. Examine Repairs Prerequisites

Once the source of the leak is located, you may want to assess the damage that it has caused or will cause in the future. For instance, when a slab leak is located, there are often other parts of the property needing repair such as the water heater and lines. If the issue isn't a slab leak, then there may be other damage or blockage that needs to be addressed. When in doubt, have a professional check the entire area to make sure before moving forward with a repair.

3. Identify the Different Types of Leak Detectors

Every leak situation is different and each type of leak may require a particular type of leak detector. This is why it is important to understand the different types of detectors and their capabilities. Professional plumbers use a variety of tools and techniques to identify the source of the leak, such as:

• Water Leak Detectors – Used to detect water leakage from pipes, water heaters, and other systems

• Gas Leak Detectors – Used to detect gas leaks from pipes or appliances

• Slab Leak Detectors – Used to detect slab leaks from underground or foundation lines

• Sewer Leak Detectors – Used to detect sewer line leaks or blockages

4. Choose the Best Repair Method

Once you have identified the type of leak detector you need, you can then choose the most appropriate remedy for repairing the leak. Depending on the severity of the problem, you may choose to have a plumber repair the leak or replace the entire system. If you have a serious plumbing problem, such as a slab leak, a hydro-jetting to clear blocked drains or a complete repiping of your property, then you should choose a professional plumber rather than attempting to do the work yourself.

5. Ensure Quality and Long-Term Benefits

In Austin, TX it is important to ensure that the work was performed properly and that the repair is going to last for many years. One of the most important factors in determining the quality of the work is to hire a qualified and experienced plumber. At Abacus Plumbing, our licensed plumbers provide expert services at very competitive prices. Our licensed plumbers are committed to performing work that will match or exceed your expectations and last a long time.

Leak Detection

Abacus Plumbing TX

Slab Leak Detection