Get Started on Toilet Installation in Austin – Expert Tips to Guide You

The sound of a running toilet can get on your nerves quickly, and if it begins acting up, chances are you're going to need to replace it ASAP. Fortunately, you don't need to worry, as toilet installation is easier than you would think, but you'll still need to be careful. Doing it properly is essential if you want to ensure your newly installed toilet is working correctly and efficiently.

If you're a property owner living in the 78744 zip code of Austin, TX, the experts at Abacus residential and commercial plumbing can help. These highly-skilled plumbers understand all aspects of residential plumbing, allowing them to repair and install gas and electric water heaters, slab leaks, and more.

In this article, we'll go over all the tips and tricks you'll need to know if you're wanting to install a toilet yourself while living in Austin, TX. We'll cover what type of tools and materials you'll need, what you'll need to do before the installation, and how to complete the toilet installation in the most efficient manner. Let's dive in.

Tools and Materials Needed

Before you start the process of installing a toilet, you will need to have a collection of tools and materials.

You'll need a toilet installation kit, which typically features a new mounting hardware, flange anchors, wax rings, and a toilet mounting bolt. Additionally, you'll need a few tools such as a pair of pliers, adjustable wrenches, a utility knife, and safety goggles. Make sure to double-check and make sure you have all the parts needed before beginning the the actual installation process.

Preparing the Toilet

Once you have gathered the materials and the proper tools, you can begin to actually install the toilet. Before doing any of the actual installation, it's important to prepare the toilet appropriately.

Your toilet will either come pre-attached with a wax ring around the bottom of the toilet or have a separate wax ring that will need to be firmly and secured in place. Make sure the wax ring is positioned correctly and properly connected to the base of the toilet or else you'll have to deal with potential water leakage.

Installing the Toilet

Now that you have your tools and materials, and you've prepared the toilet for mounting, the actual installation process can begin.

Be sure to place the toilet on a set of heavy-duty surface protectors, making sure the flush holes of the toilet are aligned with its flange on the floor. Using the installation kit, secure the mounting mechanism and center the toilet over the toilet flange. Then, securely fasten the toilet bolts to the flange and the base of the toilet.

Next, attach the tank to the toilet bowl and the fill valve to the water supply line. Make sure to connect the fill valve to the existing plumbing system, then attach the tank securely to the bowl.

Final Steps of Toilet Installation

After you have securely affixed the tank to the bowl, it's time to complete the installation.

Lastly, you'll need to seal the toilet as well as attach the supply line for water. Make sure the supply line is connected to the fill valve and ensure that all of the screws and bolts on the base of the bowl and the flange are completely tightened.

You'll also need to make sure that you check for any water leakage and inspect the entire setup for stability. You may also have to adjust any caulk at the base of the bowl.

Concluding perspectives

That's it! These are the tips and tricks you'll need to know if you're wanting to install a new toilet in your Austin, TX home yourself. It may be a daunting task, but at least now you have the guidance to make sure it's done correctly and efficiently.

If you ever need further help or advice from a professional plumber, be sure to contact Abacus residential and commercial plumbing. Our team of licensed professional plumbers has the skills and customer service to exceed your expectations.

Toilet Installation

Austin Plumbers

Home Maintenance