Getting Started on Sump Pump Installation in Austin - Texas (78757)

Do you live in the Austin - Texas (78757) area and are considering installing a sump pump? Sump pumps are an important part of a residential plumbing system, helping protect against groundwater flooding, as well as draining accumulated water to prevent flooding inside a home or business. Installing a sump pump is not a task to be taken lightly, as incorrect installation can lead to drainage problems that require costly repairs. But don't fret—with the right information, you can get started on your sump pump installation in no time.

What is a Sump Pump?

A sump pump is a pump used to remove ground water that accumulates in a sump basin, typically located in the lowest area of a basement or crawlspace. As groundwater rises, it is directed into the sump basin and then it is pumped out of the basement and away from the house. Sump pumps come in a variety of types, including primary (primary pumps are used for normal home protection from groundwater flooding due to broken sewers, natural disasters, and other common floods), battery backup (battery backup pumps are used to ensure continual availability of the sump pump in the event of a power outage), and combination (combination pumps are installed as a primary pump with a backup battery pump).

Choosing the Right Sump Pump

The main factor to consider when choosing a sump pump is whether you are installing a primary or battery backup pump. It is best to consult a professional if you are unsure which type to choose, as they can help you evaluate your needs and determine the best method for your situation. If you are installing a primary pump, you need to consider the pumps capacity— meaning how quickly the water must be removed in order to properly drain the sump basin. To determine the amount of water that needs to be drained, measure the length, width, and depth (LWD) of the sump basin.

Installing the Sump Pump

Once you have chosen the right pump, you should then take the time to properly install it. To begin, make sure the power is off to the sump basin. Even if you are installing a battery backup pump, it is important to ensure the power is off to avoid electrocution or burning gas. After that, remove any debris from inside the sump basin, and then place the pump inside. Make sure to attach it to a secure spot on the side of the basin with screws or bolts. Next, connect the discharge pipe of the sump pump to another pipe leading away from your house, such as a storm sewer or a drain tile system. The discharge pipe should be as straight as possible in order to ensure proper drainage of water. Finally, connect the electric cord of the sump pump to a properly grounded electrical outlet and turn the power back on.

Troubleshooting

If you are experiencing any problems with your sump pump after installation, there are a few things you can do to troubleshoot. First, make sure the discharge pipe is clear so that the water can flow out without any obstruction. You also may need to make sure the float switch is set properly in order to maintain the correct water level. In addition, you should check the power supply to make sure it is providing enough power to the pump, and if you have a battery backup pump, you should check the batteries to make sure they are still functioning. If all of these things have been checked and the pump is still not working, it is best to seek professional help.

To summarize

Installing a sump pump is not a task to be taken lightly. But with the right information and a few simple steps, you can get started on your sump pump installation with ease. Don't forget to check your discharge pipe and float switch for proper drainage, and to make sure the power supply is providing enough power to the pump. Abacus has experienced technicians who can help you with any problem. We are committed to complete customer satisfaction and can provide you with the help you need.

Sump Pump

Installation

Austin Texas