Getting Started on Toilet Installation in Austin, TX 78753

Toilet installation is one of the most common plumbing services that a homeowner in Austin, TX 78753 needs. But it's a tricky job, and there are some things that you should know before starting. Whether you're replacing an existing toilet or installing a new one, it's important to be aware of the particular steps involved and the common mistakes that can be made when performing a toilet installation.

From deciding what type of toilet to buy to understanding water supply options, this guide covers everything you need to know to ensure the installation is successful. Additionally, we recommend that you have it done by a professional plumber such as Abacus, who are highly skilled and experienced in the task.

Types of Toilet

Before you start your DIY toilet installation, you’ll need to decide what kind of toilet you’re going to buy. This isn’t just an aesthetic decision – toilets are available in a variety of sizes, shapes, and styles, and you’ll need to determine which one is right for you and your space.

The two main types of toilets you’ll find are gravity-fed and pressure-assisted. Gravity-fed models are typically smaller, more compact, and easy to install, but they’re also less efficient and can clog more easily. Pressure-assisted models use an air pressure chamber to help move wastewater through the pipes more effectively, so they’re more powerful and effective but also more expensive and bulky.

Location and Measurement

Once you’ve selected the toilet of your choice, you’ll need to decide where it's going to be installed. This requires measuring the space and making sure the toilet will fit. Trim carpentry or even wall removal may be required if the rough-in measurements are not exactly the same as the new toilet you purchased. You’ll also need to check that any existing waste and vent lines are compatible with the new installation.

Water Supply

Next, it’s important to identify your water supply sources such as the water line and shutoff valve. This will ensure that you have everything you need to complete the installation. The best way to do this is to inspect the existing plumbing, looking for the source of water that runs to the current toilet, and a shutoff valve nearby. Once you’ve identified these, you’ll need to make sure they’re in good working condition.

Prepping and Installation

Now you’re ready to begin the actual installation. First, remove any debris, dirt, or rust from around the base of the old toilet to ensure a tight seal between the flange and toilet. Then, prepare the new toilet by affixing the wax ring to the bottom of the bowl. Place the toilet over the flange and secure it with the lag bolts. Finally, install the new water supplies