Getting Started: Toilet Installation in Austin 78705

If you're a property owner in Austin 78705, you know the importance of regular home maintenance. That's why when issues arise, it's important to find the best-suited professionals to handle the job. Toilet installation is a crucial part of your regular plumbing needs and should be done with caution and precision. From having the right tools to understanding the steps involved in the process, below is a comprehensive guide to help you get started.

Tools and Supplies Needed

Before you begin the installation process, make sure you have the right tools and supplies. These include a measuring tape, screwdrivers, adjustable wrench, plumbing wrench, drill/driver, hacksaw, pry bar, level, sink augers, wax ring, plumber's putty or thread-seal tape, and a toilet bowl scouring brush. This is a basic list and you may need additional supplies depending on the type of toilet you're installing and other factors involved in your specific installation.

Draining the Tank

The first step is to drain the tank from any existing water. To do this you will need to turn off the water supply and flush the toilet several times until the tank is completely empty. Once the tank is empty, disconnect the current water supply by unscrewing the shutoff valve located on the base of the tank.

Removing the Old Toilet

Once the water supply is turned off, the next step is to remove the old toilet. To do this, you will need to start by unclamp and disconnecting the tank from the bowl. By unscrewing the bolts that are attaching the tank to the bowl you can detach them. You can now unscrew and remove the floor bolts from the base of the toilet. At this point, you can manually lift the toilet from the floor.

Cleaning and Prepping the Toilet

Now that you have removed the old toilet, the next step is to clean and prepare the new one. You will need to empty any packaging from the toilet bowl and tank. Be sure to clean off any dust or debris that may be on the surfaces of the bowl and the tank and allow it to the air dry for a few minutes. Important: make sure you check the base of the bowl for any build-up or material. If you find any, make sure to remove it before proceeding further.

Installing the Toilet

Now that you have everything you need and the new toilet is prepped, you can now go ahead and start the installation. Begin by lining up the new toilet with the floor flange. Make sure the toilet is properly aligned and secure it with nuts by hand. Make sure the nuts are tightened but not too tight! Once the toilet is properly installed you can now attach the tank to the bowl, securing them with bolts. At this stage, you can now reconnect the water supply by screwing on the new shut-off valve.

Final Steps

Almost there! The final step is to connect the drain line. To do this you will need to attach the flange on the back of the toilet to the drain line using a wax ring. From here, you can now seal the connection using plumber's putty/thread-seal tape. Finally, finish up by securing the toilet to the floor using the floor bolts and by tightening the nuts.

Home Maintenance

Toilet Installation

Austin 78705