Getting Started with Installing a Sump Pump in Austin, Texas (78749)

When a home is located in an area that is prone to flooding, or when the ground water in the area is high, the installation of a sump pump is necessary. And for property owners in Austin, Texas (78749), the installation of a sump pump can be a great way to protect their home from potential flooding and prevent expensive water damage costs.

Installing a sump pump is typically not a DIY job and requires the expertise of a qualified plumber. It can involve some unique considerations, depending on the type of pump, its location, and the drainage system of the home. Here are the basic steps for getting started on installing a sump pump in Austin, Texas (78749).

Step 1: Choosing the Right Pump

The first step in getting started with sump pump installation is selecting the correct pump type for your property and application. There are submersible sump pumps, which are designed to be installed underwater, and pedestal sump pumps, which are designed to be mounted above the water line. They are both used to remove water from problematic areas, usually a basement or crawl space.

Submersible sump pumps use a sealed motor and are designed for continuous operation, typically lasting longer and being quieter than a pedestal pump. Pedestal models have a longer lifespan than submersible pumps, but are loud and not as efficient at pumping large volumes of water.

Step 2: Select the Location

Once you have selected the correct sump pump type, you must decide on the location for installation. Choose an area that is readily accessible, such as a nearby corner of the basement, and away from large objects and large foot traffic. The pump should be placed on a waterproof floor covering so that any water leaking from the pump will not cause floor damage.

Step 3: Install the Sump Pit and Pump

Next, you must get a sump pit and a sump pump liner. These are available at most home improvement stores and speciality plumbing stores. The liner should be large enough to hold the water volume necessary to keep the pump operating efficiently. The liner should also have a lid to keep out debris and small animals.

Once the liner has been installed, the sump pump can be placed in the pit. It is important to make sure the electrical connections are sealed water-tight before connecting the pump to a power source. The connecting the sump pump discharges will depend on the type of pump chosen and the type of drainage system in place.

Step 4: Test the System

After the system is installed, it should be tested to make sure it functions as expected. Depending on the type of system installed and the purpose of the pump, tests may include measuring the depth of the pit, testing water flow rate and pressure, performing an emergency cutoff function, and measuring head loss.

Once the installation and testing is completed, the sump pump can be operated safely and efficiently.

Sump Pump Installation

Sump Pump Service

Austin TX plumber.