Getting Started with Sink Garbage Disposal: Tips for Austin-Texas Property Owners

For Austin property owners, installing a sink garbage disposal is the perfect way to keep kitchen odors at bay and maintain cleanliness. Garbage disposals help break down food waste into small pieces and reduce the risk of clogging or jamming. They have become increasingly popular for residential and commercial use in the last 10 years due to their convenience and efficiency.

In this article, we'll outline the basics of installing a sink garbage disposal in the 78754 ZIP code area and the steps you should take to get it up and running in no time. We'll also throw in a few tips on maintaining and troubleshooting a disposal when needed. Read on for more information on getting started with a sink garbage disposal.

Choosing the Right Garbage Disposal

The first step is to choose the right garbage disposal for your kitchen. Garbage disposals come in various sizes and can handle different amounts of food waste. You need to consider the size of your sink and the food volume you plan to put down the drain. You can purchase the right model for your kitchen from a variety of manufacturers.

When buying a garbage disposal, you should also pay attention to the type of motor it runs on. For example, electric garbage disposals are usually more expensive but offer higher grinding power. It's also important to check the warranties offered by garbage disposal companies to make sure they have a good customer service record.

Installing the Garbage Disposal

Once you've purchased the disposal, you're ready to install it. The process isn't complicated but it should still be handled cautiously. Before starting installation, turn the power to the kitchen off.

Start by assembling the parts and carefully following the instructions provided by the manufacturer. Connect the power cord to the three prongs in the electrical junction box and tighten the screws. Once the motor is attached, you can use the plumber's putty to seal it.

The next step is to slide the upper flange onto the disposer and attach it with the provided screws. Now, attach the discharge tube to the assembly. The flange should fit snugly the tile or the sink. Take the disposal pipe elbow and secure the connection with plumber's putty, teflon tape, or both.

The last step is wiring the power cord to the disposer. Make sure the switch on the disposer is in the off position and the power is still off. Use a wire nut to connect the three wires and attach the ground wire to the disposer's terminal. Once the connection is complete, turn the power on.

Running and Maintaining a Garbage Disposal

When all the installation is complete, turn the disposal on and let it run for a few minutes before adding any food waste. This practice will help the disposer break down the particles in the waste and clean the drain pipe.

Once the disposal is up and running, it's important to take good care of it. Regularly check to make sure the switch, the power cord, and the drain tube are all in working condition. Additionally, it's a good practice to use an enzyme cleaner to break down food particles and prevent clogging.

Troubleshooting a Garbage Disposal

If your disposal starts to act up, the first thing you should do is check the power switch. Make sure it's in the correct position and that the power is on. If the switch is working, try to reset the unit. Unplug the power source and let the disposal cool down for a few minutes before plugging it back in.

If none of these solutions help, it's better to call a professional plumber to inspect the garbage disposal. Abacus certified plumbers specialize in the installation and maintenance of all types of garbage disposals and can handle even the most complicated plumbing issues.

Garbage disposal

sink disposal

plumbing