Installation of Toilets – a Comprehensive Step-by-Step Guide for Property Owners in Austin, Texas (78721)

Are you an Austin resident in need of toilet installation? Or maybe you're looking to replace an old, outdated model with a new one? Either way, this guide will serve as a comprehensive step-by-step walkthrough to assist you in the process.

Having a solid installation job is paramount, as it's essential to avoiding future plumbing catastrophes. Keep in mind that most home owners do not have the necessary knowledge or experience to attempt such a job on their own, so it's recommended that you contact a professional plumber. Abacus residential and commercial plumbers are proficient at repairing all kinds of plumbing issues, including gas and electric water heaters, slab leaks, leaky pipes, and hydro jetting clogged drains.

This guide will provide you with the necessary information so you'll know what to expect when you contact a plumber.

Getting Prepared

Assuming you've already purchased your new toilet, the first step of the job is to gather the necessary supplies and tools. You'll need a few simple items.

• A tape measure

• An adjustable wrench

• A hacksaw

• A level

• Safety gloves

• Some wax-free gasket sealant

• Packing plumber's tape

• Hand screwdriver

• Replacement bolts

• A bucket

Removing the Old Toilet

Now that you've gathered all the necessary items, it's time to uninstall the old toilet. Firstly, turn off the water valve that feeds the toilet, this will ensure that the tank compressor does not keep filling with water. Once that's done, go ahead and flush any leftover water in the toilet.

Now face the back of the toilet seat and unscrew the nuts that secure the tank to the bowl. The nuts can be unscrewed with an adjustable wrench. After that's done, lift the tank up from the bowl and discard them separately.

Once the tank is removed, you'll have clear access to the floor bolts that are securing the toilet to the floor. Use an adjustable wrench to unscrew the bolts and lift the toilet up from the floor. At this point, it's essential to unforgettably remember the orientation of the discharge pipe, as this will be important for when the new toilet is installed.

Installing the New Toilet

Now's the time to begin the installation of your new toilet. First, take your measurement tape and measure the actual length of the discharge pipe. These measurements will be important when you make your cut for the flange.

Once the measurements are taken, take the hacksaw and make the cut with your measurements. Then, take your wax-free gasket sealant and as you put the flange around the persisted part of the pipe, use the sealant to ensure a secure and tight seal.

At this point, it's time to place the new toilet on the floor and make sure that it's level. Make sure to carefully insert the flange into the discharge pipe, and if necessary, use some packing plumber's tape to make sure it's well secured.

The last step is to attach the nuts and the bolts to the back of the toilet and secure the tank back to the bowl. The bolts should be tight enough, but be sure to not over-tighten them.

Toilet Installation

Residential Plumbing

Professionals