Getting Started on Your Garbage Disposal: What you Need to Know Before Attempting a Repair

Garbage disposals are an indispensable part of a modern home kitchen. The garbage disposal helps prevent clogged Abacus Plumbing Drains by breaking down food waste quickly and efficiently so you can carry on with your cooking, baking, or washing up tasks with minimal interruption. So when something goes wrong, you want to make sure that you can get your garbage disposal back in order as quickly as possible. Yet often, due to one minor misstep or another, many people find themselves on the receiving end of a long and expensive repair fee. To help you avoid the same mistake, here's all you need to know about getting started on fixing your garbage disposal, no matter where you're located in Round Rock, Texas.

Understanding What's Needed

Getting started on a garbage disposal repair is always a good place to begin. As such, the first step is to make sure you have the right tools handy so that you can get the job done as quickly as possible. The basic tools you should have on hand are a pair of narrow-bladed pliers, a screwdriver featuring both a Phillips and a flathead top, a wrench, a nylon brush, and a cloth to remove any debris and dust that some of your efforts might uncover. Additionally, to make your life easier, it is always a good move to buy a garbage disposal repair kit, such as the one produced by Liquid Wrench.

What to Do to Get Started

Once you have all the necessary tools, the next step is to Empty the sink before starting your repair. To do this, you need to turn the power off via the breaker box. Then, you need to plug the sink's bottom hole, locate the drain bottom, and loosen the nuts. This will allow all the water sitting in the drain to outflow, at which point you can relax the clamps that hold the garbage disposal unit in place.

Once that small task is complete, the next move should be to remove the splash guard located between the disposal unit and the sink's drain opening. And while you are there, make sure you also unscrew the metal hoop clamp to allow the removal of the garbage disposal's mounting assembly.

Now, it is time to locate the EZ-Mount Ring, which will be snug fitted against the sink's underside. To allow the garbage disposal to be removed, you need to loosen the three nutscrews with the appropriate tool. Once that is done, you can use your gloved hand to unscrew the unit itself.

Final Steps

Once everything is removed and the unit is just sitting in your hands, it's time to take a good look. While you are at it, consider replacing the mounting and hopper vanes since they are most likely worn and may not work properly with the new unit you are about to install.

After the inspection is complete, it is time to move on to the cleanup stage. With the help of your nylon brush and cloth, make sure every visible surface is clean and there is no more grunge left stuck to the housing.

Once everything is clean and shiny, you can go ahead and install the new disposal unit. When doing so, make sure to stay consistent with the instructions provided in the installation manual. After everything is in place and secured, take the time to check if the unit is properly mounted.

You are now ready to begin again cooking, baking, or washing up with little worry of clogged drains or plumbing issues.

Garbage Disposal Repair

Garbage Disposal Installation

Round Rock Texas