Getting Started with AC Repair in Austin, Texas

When temperatures soar in Austin, Texas, air-conditioning repair can become an urgent necessity. Fortunately, Abacus residential and commercial plumbers are equipped to handle all manner of AC issues, from small repairs to major overhauls. To help you get off to a good start with AC repair, here are some tips from South Austin plumbing professionals.

Identify the Problem

Before you can break out your air conditioning repair tools, you will need to identify the problem. If your AC breaks down completely, this can be difficult. But if your AC is still functioning, but not providing the quality cooling you want, the issue is likely with one of the following:

Refrigerant Leak.

Faulty Capacitor.

Dirty or Clogged Condenser Coils.

Leaking or Faulty Duct Work.

Stalling Fans.

Obstructed Airflow.

Dirty Air Filters.

Gather the Necessary Tools

While it is possible to tackle some AC repair jobs on your own, it is important to make sure you have the necessary tools. Before investing in any specialty tools, consult a professional who can provide you with advice on what you'll need. It is also important to ensure that your tools are designed for the task ahead.

Below is a list of common tools needed for most AC repairs:

Screwdriver/pliers set.

AC Refrigerant Gauges.

Vacuum Pump.

Thermometer.

Leak Detector.

High-Pressure Hose.

Safety Goggles/Mask.

Tubing Cutter/Bender.

Drill.

Check the Power Source

When an AC unit is not operating correctly, the first step should be to check the power source. It is important to make sure the unit is switched on, as well as that the circuit breakers and fuses are in good working order. Make sure the electrical connections to the unit are properly attached, and rule out the potential for any water damage in the area.

Identify the Condition of the Filters

A dirty, clogged or worn-out air filter can severely hamper an AC system's ability to cool air. Replace the filter with a new, clean filter to restore the system's efficiency. It is recommended that you inspect and replace the air filter every 3-4 months.

Recharge the Refrigerant

When doing any AC repair, it is important to follow proper safety instructions. Low refregerant levels can cause an AC unit to freeze up, preventing optimal cooling. Because of the hazardous nature of the job, it is best to enlist the help of an AC professional to help with this task.

Clean the Outdoor Coil

When working on an AC unit you should check for dirt and debris, paying particular attention to the outdoor coil. The outdoor units require regular maintenance to ensure that condensation is drained properly, and that the unit operates at maximum efficiency. If you don't feel comfortable with the cleaning process, you can always contact a professional for help.

In the end

AC repair can be a daunting task, but with the help of an experienced professional, it can be much less daunting. Abacus residential and commercial plumbers are available to help you navigate any issues you might have with your air conditioner. Give us a call and allow us to bring you maximum comfort in minimal time.

AC repair

Austin Texas

Residential Plumbing