A Comprehensive Guide on How to Get Started on Toilet Installation in Austin, TX 78739

When it comes to home maintenance, it's essential to get the job done correctly the first time. Installing a new toilet can be a tricky task, but with the right materials and experienced professional you can get the job done with ease.

If you're a property owner in Austin,Texas 78739 and considering installing a toilet, this comprehensive guide will help you get started quickly and effectively. Here we'll provide you with all the information you need for a successful installation, from the type of toilet to buy, the materials you need, pre-installation steps, and a step-by-step guide to getting it installed.

Be Prepared: What Type of Toilet to Buy

The first step is to decide on which type of toilet best suits your needs. Common types of toilet are one-piece, two-piece, and wall mounted toilets. Depending on your available space and budget, there is a type that is perfect for you – a good rule of thumb is to go with the type that's already used in your bathroom.

When buying a toilet, make sure you consider the height, flushing power, water efficiency, and the shape. Most toilets nowadays follow the gravity flushing principle, but check the specifications just to be sure. Also, if you plan to reuse the same water lines and outlets, make sure the new toilet is compatible with them.

Gather the Materials and Pre-Installation Steps

To get started, you need to gather the right materials. These include the toilet, wax ring, mounting bolts and washers, silicone sealant, Teflon tape, putty tape, putty knife, caulk gun, and adjustable wrench. Depending on the complexity of the installation, you may need additional specialized tools such as a hacksaw, ice maker kit, and angle auger. If you're unsure of what's needed, seek advice from an experienced professional.

You also need to do a few pre-installation steps before you get started. Firstly, turn off the water supply and remove the old toilet in accordance with local regulations. This involves removing the bolts, flushing the toilet, and thoroughly cleaning the area. It also helps to disconnect the water supply and empty the tank, as this can make the installation process easier.

Step-by-Step Toilet Installation Guide

Now that you have all the materials and have done the pre-installation, you can begin the process of installing the new toilet.

1. Place the wax ring around the base flange and put the new toilet bowl in place. Push down firmly and make sure the toilet is leveled across the entire base.

2. Insert the mounting bolts into the two slots on the side of the toilet.

3. Apply plumber's putty around all the bolts and washers, then use the adjustable wrench to tighten them.

4. Connect the tank to the bowl. Carefully align the tank and the bowl's bolt holes, then use a Phillips screwdriver to secure the nuts.

5. Connect the water supply to the toilet. Take the flexible water supply line and attach it to the angle stop valve. Make sure you use Teflon tape to seal each joint tightly.

6. Install the toilet seat and lid. Place the lid on the top of the tank and use a screwdriver to secure the screws in place.

7. Test the flushing system. Finally, turn on the water and test the flushing system to make sure everything is working correctly.

Closing considerations

Installing a new toilet may seem daunting, but with the right materials, pre-installation steps, and step-by-step guide, you can do it with confidence. Keep in mind that all plumbing projects must be done in accordance with local regulations and codes, so it's always best to seek advice from an experienced professional.

Toilet Installation

Plumbing

Austin TX 78739