Installing a Tankless Water Heater: An in-Depth Guide for Austin Homeowners in 78732

Tankless water heaters are becoming increasingly popular among Austin homeowners looking to improve their hot water capabilities. Not only do they provide an efficient way to heat water, but they are also much smaller than traditional water heaters—meaning they save you precious space. Although installing a tankless water heater might be intimidating at first, it’s a relatively straightforward process that many Austin residents can successfully complete on their own.

If you’re living in 78732 and considering installing a tankless water heater, this guide is for you. We’re going to break down all the steps involved in the installation process, so that all the information you need to make an informed decision can be found in one spot.

What You’ll Need

Before you can start installing your tankless water heater, you’ll have to make sure you have all the materials you need. Here’s a list of what you should have on hand:

One or more power tools (1/4-inch drill, reciprocating saw, drill bits, etc.)

Safety glasses and gloves

Measuring tape and level

One or more Flash Seals

Adhesive (epoxy, silicone, or hot glue)

Safety valve

Tubing

Pipe insulation

Pipe sealant

Teflon tape

Copper tubing

Selected tankless water heater

Step-by-Step Guide for Installing a Tankless Water Heater in Austin, Texas

Installing a tankless water heater requires certain steps to be done in the correct order. A careful installation job will prevent expensive repairs in the future, as well as make sure the heater works efficiently.

1. Select the proper location

Choosing the proper location for your tankless water heater is one of the most important elements of a successful installation. Before you purchase one, make sure to measure the area where you want it installed. You’ll also need to determine the best spot that offers easy access to a gas line, water pipes, and a drain.

2. Install the necessary pipes

Once you’ve determined your chosen location, you’ll need to install all necessary pipes. This will involve running copper pipes from the water and gas sources to the heater location. You should also make sure to insulate the pipes in order to protect them from freezing, as well as corrosion.

3. Hang the tankless water heater

Once all necessary pipes are installed, you can hang the tankless water heater. It’s recommended that you use a Flash Seal or other type of support bracket to hang the heater, as this will help ensure it stays secure.

4. Install the safety valve

Installing a safety valve helps protect your property from potential damage due to gas or water leaks. It normally takes just a few minutes to install the safety valve at the designated spot.

5. Connect the necessary pipes

The next step is connecting the necessary pipes to the tankless water heater. It’s important to make sure you’re using the correct tubing, pipe sealant, and Teflon tape.

6. Test the installation

Once all necessary pipes and connection points have been securely fitted, it’s time to test the installation. This involves running the water supply line in order to make sure everything is functioning properly. If your heater is connected to a gas line, you should also turn the gas on and make sure there are no leaks.

When to Call in the Professionals

Installing a tankless water heater can be a fairly straightforward process for many Austin homeowners. However, if you lack the necessary tools and experience, it’s best to opt for professional assistance. After all, you don’t want to end up with an inefficient or dangerous heater due to an incorrectly installed unit.

At Abacus Plumbing, we specialize in the installation and repair of all kinds of plumbing fixtures, including tankless water heaters. No matter what your individual plumbing needs may be, you can count on our highly trained and experienced team to provide top-notch service. We take pride in our commitment to customer satisfaction, and we guarantee that you’ll be completely satisfied with the results.

Last reflections

Installing a tankless water heater can be quite a complex job—but with the right tools and know-how, it’s a project that many Austin homeowners can do on their own. With this in-depth guide, you now have all the information you need to get started on the installation process. And if you have any doubts or issues, you can always have a professional from Abacus take care of the job for you.

Tankless water heater installation

78732 Austin

Texas

Installing a Tankless Water Heater: An in-Depth Guide for Austin Homeowners in 78732