Installation Guide for a Sump Pump in Austin, TX 78737

When it comes to protecting your home from potential water damage, nothing works better than a sump pump. Whether you're looking to stave off the effects of high water tables or stymie issues caused by flash floods, having a properly installed sump pump can provide the ultimate security of keeping your property dry.

For many homeowners, the idea of undertaking the installation of a sump pump might seem daunting. Fortunately, the process is not nearly as complex as it seems and can be done relatively quickly and easily with the right expertise. Here's a handy guide to help you through the process.

Step 1: Locate the Most Reasonable Place to Install Your Sump Pump

First, you need to identify a spot in your basement or crawlspace that is conducive to having a sump pump installed. If you've got a basement, that's the ideal situation, as water needs to be redirected away from the basement itself. Look for a location that is as close to the exterior wall of your home and as far away from any furniture as possible.

Step 2: Begin Preparing the Hole for the Sump Pump

Once you've identified a suitable place for the sump pump, you need to start digging the hole. This can be done with either a shovel or a small power auger and should be about 18 inches deep. It's important to dig the hole wide enough to fit the sump basin that your sump pump will be sitting in.

Step 3: Install the Sump Basin and Connect Piping From the Basin to an Exit Point

Next, you need to slide the sump basin into the bottom of the hole. You should also secure it to the walls of the hole using waterproof mortar. Then, you must attach the PVC piping from the basin to an exit point outside of the hole to redirect water away from the house.

Step 4: Connect any Electrical Piping Necessary

Depending on the particulars of your sump pump installation, you might need to run any necessary electrical wiring from the sump pump to an electrical outlet nearby. Connecting the wiring is usually fairly straightforward as long as you abide by the instructions of the manufacturer. This step shouldn't be attempted by the homeowner — or anyone without a background in electrical wiring — as even a small mistake here could be catastrophic. Enlist a qualified electrician or a licensed plumber to handle any wiring.

Step 5: Secure the Pump into the Basin

Secure the sump pump to the basin, making sure it is properly affixed to the basin so the pump can operate without any wobbling or movement.

Step 6: Test the System

Once everything is secure, fill the basin and sump pump area with water to test the system to be sure that everything is working properly. Inspect all connections to make sure there are no leaks or gaps in the system.

In summary

Unless you're a licensed electrician or a professional plumber, it's likely best to entrust the job of sump pump installation to the experts. Abacus Plumbing can help you assess your needs and will provide safe, reliable sump pump installation. Contact us today to discuss a suitable solution for your property.

Sump Pump Installation

Plumbing

Home Maintenance